Install RFID reader in vehicle

Install RFID reader in vehicle

1. Open the device

Insert a wide, flat screwdriver into the opening slot and open the cover by gently twisting the screwdriver.

2. Insert batteries

Insert the batteries according to the polarity marked in the battery compartment.

3. Close the device

Put the cover back and press the device together until it is firmly closed.

4. Mounting in the vehicle

Double-sided hook-and-loop tape is included in the package.

• Attach one part of the tape to the back of the RFID reader.
• Attach the other part to a suitable place in the vehicle.

Placement
The device should be mounted within arm’s reach of the driver in the normal driving position.

For safety reasons, note the following:

• The device must not be mounted on the steering wheel.
• The device must not be placed where it obstructs the driver’s view.